These quality built gap bed centre lathes are easy to use, quick & practical. The modern day answer to manual turning with a modern proven design & faultless construction. With high safety standards this machine exceeds CE and HSE requirements. CE & CA Marked as standard.
A wide range of speeds with an inverter to give you full variable speed, feeds and screw-cutting options gives this machine a head start over the competition. Designed & built to run for the next 20 years without repair. Give one of our engineers a call to discuss your next lathe.
Model | AJ165V |
Centre Height (mm) | 170 |
Swing Over Bed (mm) | 342 |
Distance Between Centres (mm) | 760 or 1,000 |
Swing Over Cross Slide (mm) | 205 |
Swing in Gap (mm) | 512 |
Cross Slide Travel (mm) | 180 |
Top Slide Travel (mm) | 95 |
Bed |
|
Width (mm) | 230 |
Headstock |
|
Spindle Nose | D1-4 |
Spindle Bore (mm) | 40 |
Taper Reduction in Sleeve (MT) | 5 |
Number of Spindle Speed Ranges | 2 |
Range of Spindle Speeds (rpm) | 100 - 3,000 |
Tailstock |
|
Quill Diameter (mm) | 50 |
Quill Travel (mm) | 112 |
Quill Internal Taper | 3 MT |
Feeds Range and Gearbox |
|
Cross feeds (mm / rev) | 0.025-0.85 |
Longditudinal feeds (mm / rev) | 0.05-1.7 |
Metric Threads (mm) | (39) 0.2-14 |
Imperial Threads (tpi) | (45) 2-72 |
Module Threads (mod) | (18) 0.5-3.5 |
Diametrical Threads (dp) | (21) 4-44 |
Pitch of leadscrew (mm) | 6 |
Motors |
|
Main Motor (Kw) | 2.2 |
Coolant Pump Motor (kw) | 0.09 |
Main features include.
3 jaw chuck.
High power worklight built into the machine guard.
Induction hardened and ground one piece beds.
Variable speed with range gears to give you the exact speed you want all the time.
Headstock gears are case hardened and ground splined shafts which turn on roller bearings.
The universal gearbox is totally enclosed and provides a range of metric or imperial threads.
Saddle gearbox enables selection of feed to x and y axis, or to screw cutting and is available in left or right hand form.
CE & CA mark as standard.
Options.
3 jaw chucks.
Quick change tool post with 4 holders.
4 jaw chucks.
Face plates.
Steadies, centres and revolving centres.
Taper turning.
Grinding Attachment.
Digital readouts.
Tooling packages.